(Category No. 216/2021 & 387/2021)

Part I

a, Mechanics of Solids and Structural Analysis – (10 Marks )


Concept of stress and strain, Bending moment and shear force, Stresses in beams, Deflection of  beams, Theory of columns, Truss analysis, Displacement response of statically determinate structural systems using energy methods, Principle of virtual work, Statically indeterminate structures, Strain Energy methods, Moving loads and influence lines, Arches. Slope Deflection  Method, Moment Distribution Method, Clapeyrons Theorem (Three Moment Equation), Kani’s method of analysis.

b, Fluid Mechanics and Water Resources Engineering – (10 Marks )

Fluid Statics- Fluid pressure, Buoyancy and floatation, Fluid Kinematics, Dynamics of fluid flow, Flow through orifice and notches, Flow through pipes, Boundary layer, Drag and Lift on immersed bodies. Hydraulic machines- flow through vanes (moving and stationary) Impulse and reaction Turbines, Centrifugal Pumps, Open channel flow, Uniform flow, Hydraulic Jump, Gradually varied flow, Dimensional analysis and model testing.

Hydrologic cycle, Precipitation, Infiltration and Evaporation. measurement and data analysis. Runoff- components and computation, Hydrograph, Unit Hydrograph and S-Hydrograph. Irrigation types and methods- Soil water plant relationships, Frequency of irrigation, Computation of crop water requirement. Stream flow measurement -Stage-discharge curve. Meandering of rivers, river training works. Surface water systems: diversion and storage systems, reservoir – estimation of storage c/pacity and yield of reservoirs – reservoir sedimentation -useful life of  reservoir. Groundwater – Aquifer types and properties – Steady radial flow into a well. Estimation of yield of an open well.

Part II

a, Surveying and Levelling, Quantity Surveying and Valuation (10 Marks )

Basics of Surveying, Levelling and Contouring, Area and Volume Computation, Theodolite Survey, Mass Diagram, Triangulation, Theory of Errors, Electronic Distance Measurement, Total Station Survey, Global Positioning Systems, Remote Sensing, Geographical Information System  

Analysis of rates – Data book and schedule of rates, Analysis of rates for various items of work, Detailed specification. Types of Estimate. Detailed estimate including quantities, abstract and preparation of various items of works, Preparation of bar bending schedules for various RCC works. Valuation- Methods of valuation, Depreciation, Fixation of rent. 

c, Building materials, Construction Technology, Construction Management – (20 Marks )

Construction Materials – Timber, Mortar, Iron and Steel, Structural steel, Modern materials. Concrete–Admixtures, Making of concrete, Properties of concrete, Mix proportioning. 

Building construction- Foundations, Cost-effective construction, Masonry, Lintels and arches. Floors and flooring, Roofs and roof coverings, Doors, windows and ventilators, Finishing works. Tall Buildings – Steel and Concrete frame, Prefabricated construction, Slip form construction. Vertical transportation – Stairs, Elevators, Escalators and Ramps. Building failures and Retrofitting, failures in RCC and Steel structures. 

Construction Planning and Scheduling, Construction disputes and settlement, Ethics in Construction, Construction safety, Principles of materials management, Quality management practices, Construction procedures. 

Part III

a, Environmental Engineering – (10 Marks)

Water sources and demand, Quantity estimation, Population forecasting, Quality of water. Water treatment- Physical methods, Chemical methods. Design of sedimentation tank, flocculator, clariflocculator, filters, Membrane treatment techniques. Disinfection methods. Distribution of water, Pumps, Hardy Cross method of analysis 

Waste water- Sources, Characteristics, Oxygen demand. Design of sewers, Circular sewers, Partial flow and full flow conditions. Sewer appurtenances, Disposal of wastewater, Streeter Phelps equation, Oxygen sag curve, Treatment methods, Aerobic and anaerobic methods, Design of various treatment units-Screening, Grit chamber, Sedimentation tank, Activated Sludge process, Trickling filter, Rotating biological contactor, Septic tanks, Imhoff tanks, Oxidation ditches, Oxidation ponds, Upflow anaerobic sludge blanket reactors, Sludge digestion, Sludge drying bed. Air pollution-sources, effects on human, Control of air pollutants, Air quality legislations. 

b, Design of Structures – (20 Marks )

Limit state method of design, Analysis of reinforced rectangular beams, Shear strength of RC beam, Design of shear reinforcement, Bond and development length, Curtailment of reinforcement, Design for torsion, Design of one way slab, Cantilever slab, Continuous slab (detailing only), Two way slabs, Limit state of serviceability, Deflection, Cracking, Stair cases -design & detailing. Columns-effective length-design of axially loaded short columns with rectangular ties and helical reinforcement. 

Columns subjected to compression, Uniaxial bending and biaxial bending, Design of slender columns, Design of wall/strip footing- design of footings, Design of cantilever retaining wall without surcharge, design principles of counter fort retaining wall, Circular slabs simplysupported, fixed and partially fixed subjected to udl, Design of water tanks, Design philosophy and requirements, joints, IS code recommendations, Pre-stressed concrete, Concept of prestressing, materials and methods of prestressing, Prestressing systems, losses of prestress, Analysis of prestressed beams (rectangular and I-sections) at stages of transfer and service 

Steel and steel structures – Bolted and welded connections, Tension members, Compression members, Beams, Roof trusses, Purlins. Timber structures- columns, composite beams (concepts only) 

Part IV

a,  Geothermal Engineering – (10 Marks)

Major soil deposits of India, Classification and three phase system of soil, Permeability of soils, Principle of effective stress, Shear characteristics of soil, Consolidation (Terzaghi’s theory of onedimensional consolidation only) and Compaction. 

Stability of finite slopes-Swedish Circle Method and Friction circle method, Stresses in subsoil due to loaded areas of various shapes, Boussinesq’s formula, Newmark’s chart Lateral earth pressure-Rankine’s and Coulomb’ theories 

Bearing capacity of soil, Estimation of magnitude of settlement, Site investigation, Standard Penetration Test and Plate load test, Design of shallow, deep and machine foundations, Ground  improvement techniques. 

b, Transportation Engineering and Urban Planning – (10 Marks )

Classification and alignment of highways, Geometric design of highways, Properties and testing of pavement materials, CBR method of flexible pavement design, Construction and maintenance of pavements, Design of runways, taxiways and aprons. Traffic characteristics- Traffic studies and 

analysis, Traffic control devices. Airport characteristics- Aircraft component parts. Site selection, Terminal area planning- Airport marking and lighting. Traffic regulation rules, Highway capacity, Traffic safety, Influencing factors and preventive measures for traffic accidents, Basic diagrams of traffic flow theory. Railways- geometric design of tracks, railway operation control, Maintenance. Alignment, Ventilation and drainage of tunnels, Types of harbours and docks.  

Goals and objectives of planning; Components of planning, Regional planning, Theories of urbanization, Study of Urban Forms, Zoning, Development of new towns, Town Development Plan, Town planning acts.

NOTE: It may be noted that apart from the topics detailed above, questions from other topics prescribed for the educational qualification of the post may also appear in the question paper. There is no undertaking that all the topics above may be covered in the question paper

EXAM ഇല്ലാത്ത സമയങ്ങൾ നിങ്ങൾ ഇതുപോലെയാണോ ചിലവാക്കുന്നത്? എന്നാൽ വരാനിരിക്കുന്ന അപകടങ്ങൾ നിങ്ങൾ അറിയുന്നില്ല…

EXAM ഇല്ലാത്ത സമയങ്ങൾ നിങ്ങൾ ഇതുപോലെയാണോ ചിലവാക്കുന്നത്? എന്നാൽ വരാനിരിക്കുന്ന അപകടങ്ങൾ നിങ്ങൾ അറിയുന്നില്ല…

മത്സര പരീക്ഷകൾ ഒരു തുടർക്കഥയാണ്. അതിൽ ഓട്ടം തുടർന്നുകൊണ്ടിരിക്കുന്നവർക്കേ ലക്ഷ്യസ്ഥാനത്തേക്ക് മുന്നേറാൻ കഴിയു.. പാതി വഴിയിൽ പിൻവലിയുന്നവർ, ലക്ഷ്യ സ്ഥാനത്ത് എത്താൻ പിന്നിട്ട വഴികൾ വീണ്ടും താണ്ടേണ്ടതുണ്ട്. ഇത് നിങ്ങൾക്ക് ഇരട്ടി ഭാരമായേക്കാം. പരീക്ഷകൾ അവസാനിച്ചെന്ന്...

read more